Method 2: In-House Station Accessible; Programming The Other Already Programmed Bell Buttons; Note - TCS PDS Series Product Information

PI_GB_PES_PDS_Art0015689_1v0.doc 15

Method 2: In-house station accessible

LED illuminates
1
Press briefly
2
1st person
person
Lift handset Press until
at the Prog2 tone
in-house sounds
station. ...
3
press briefly

Programming the other already programmed bell buttons

• Step 1
• repeat step 2 each time for additional bell buttons where necessary
• complete the programming of all buttons with step 3

Note

Repeated programming of an already programmed bell button always only changes the
second serial number. If you want to change the first programmed serial number, you have
to delete both serial numbers and then re-program both serial numbers.
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
LED flashes
2nd person
...and
Noprog tone sounds at
1)
sounds
LED illuminates
... and ring tone release replace
front-door and
in-house station.
programming
mode
of system
switched on
1st
bell button
programmed
handset
at in-house
station.
programming
mode
of system
switched off
Subject to change without notice.
Art.Nr. 0015689 Version 1.0 mi
10/2005