Trouble-Shooting By Message Number; Explanations On Reference Numbers; General Messages - Bosch BEA 150 Repair Instructions

8.

Trouble-shooting by message number

i References shown on display when malfunctions occur. By acknowledging the message the reference is deleted. However, it will
reappear if the malfunction has not been eliminated. If several references are given then the next reference follows the
acknowledgement. The individual references are listed in the following tables. Displayed are the reference number, reference text
and remedial measures.
If a reference number is displayed which is not listed in the following chapters then please notify our hotline of it.
8.1

Explanations on reference numbers

0000 ... 255 Malfunction messages of OS9 operating system
1000 ... 1099 Malfunction messages for boot test functions
1100 ... 1099 Malfunction messages on software installation functions
1200 ... 1207 Malfunction messages on print functions
1300 ... 1399 Malfunction messages of hardware test over remote
2000 ... Malfunction messages of RTM
3000 ... Malfunction messages of MTM
4000 ... Malfunction messages of Gas Analysis Module (GAM)
5000 ... Malfunction messages of HC11 download
6000 ... Malfunction messages on OBD printed circuit board
§00xx Malfunction messages for testing OBD printed circuit board with KTS115PC program
8.2

General messages

No. Message
1000 Error creating glob. data module
1001 Error installing MTM task
1002 Error installing PRN task
1003 Error installing RTM task
1004 Error installing EAM task
1005 Error installing IO task
1006 Error installing AWN-Task
54
Possible cause
Software error
Remedy
Re-boot BEA, if error still present:
Re-install system software
Section
5.23