Checking The Remote Control; Checking The Test Calibration Switch For Customer Service; Reading Out The Error List; Download Systemsoft - Bosch BEA 150 Repair Instructions

5.20

Checking the remote control

5.21 Checking the Test calibration
switch for Customer Service
5.22

Reading out the Error list

5.23

Download SystemSoft

In the Input test menu, open the Remo-
te control menu by clicking it or by
pressing Enter E on the keyboard.
Press keys ESC, F1, F2, F3, F4 and F5
on the remote control one after the other.
Each remote-control key you press is dis-
played in the results box.
End the test of the remote control by
clicking the End button.
Select the menu Test calibration switch
and open by clicking or by pressing Enter
E on the keyboard.
The current switch setting is displayed.
Select the Error list menu and open by
clicking or by pressing Enter E on the
keyboard.
The last 20 stored error messages are
displayed.
This menu is particularly helpful for dea-
ling with sporadically reported faults.
! This menu is usable for the BEA
module (BEA 050) and BEA mobile
only.
Downloading of the system software
for BEA 1xx, 2xx and 3xx is done over
the installed floppy disk drive!
If you should inadvertently run a download
for BEA 1xx, 2xx or 3xx with this program,
then after the download is completed the
system software for BEA 1xx, 2xx or 3xx
has to be installed back using the system
software diskette.
43