No-Sensor; Read No-Sensor; Set No-Sensor; No-Measurement - Bosch BEA 150 Repair Instructions

4.12

NO-Sensor

4.12.1

Read NO-Sensor

4.12.2

Set NO-Sensor

24
i This menu is only for BEA's equipped
with a retrofit NO measuring sensor!
This menu is used for monitoring, instal-
ling and checking the NO measuring sen-
sor.
Start the menu with E or by double-
clicking the mouse.
The following menus can be executed:
Read NO-Sensor
Set NO-Sensor

NO-Measurement

Mounting an new NO-Sensor
Readjustment with test gas
Calibration interval setting
Calibration sequence setting
The status of the NO measuring sensor is
displayed in this menu.
In this menu, the BEA is informed as to
whether or not an NO measuring sensor is
installed.
Confirm your selection of this menu with
E or by double-clicking the mouse.
The OK box appears for 1 s.