Loading Paper In The Bypass Feed Table - Ricoh FT4018 Operating Instructions Manual

Loading Paper In The Bypass Feed Table

Regarding the bypass feed table,see page.31
1
Lift the paper hold lever.
Swing out the extender if setting copy
paper larger than A4 : , 8
2
Insert copy paper until it stops.
The image will be copied on the side
of paper that you place face up.
If the guides are not flush with the
copy paper,a skew image or paper
that you place face up.
Fan OHP transparencies or translucent
paper to get air between them to avoid
multi sheet feed(multiple sheets fed to-
gether at the same time).
3
Lower the paper hold lever.
If you have set copy paper larger than
A4 : , 8 " x 11" : , support the trailing
1/2
edge of copy paper with your hand
when lowering the paper holder.
" x 11" : .
1/2
LOADING PAPER
49