Ricoh FT4018 Operating Instructions Manual page 60

4
Square the paper and set in the
tray.
Do not stack paper over the limit
mark.
5
While pressing the release lever
on the front and rear side guides.
Slide the guides to the paper po-
sition.
Do not press the front and rear
guides strongly against the paper.
Slide the guides until the font and
rear guides securely hold the paper.
6
Adjust the paper size selector.
If the paper size you need is not
there, select "
selector.
7
Lift the tray sligthly, and then re-
insert it carefully until it stops.
"on the paper size
CHANGING PAPER SIZE
57