Ricoh FT4018 Operating Instructions Manual page 64

3 . Auto Reset Time Set
As a default setting, the copier can reset itself 1 minute after the final copy
is made or after the last time any key is pressed. If a 1 minute reset time is
not appropriate, you can change this time or cancel this function.
For how to change settings,
Default: 1 minute (Setting: 0)
Setting
0
1
2
4 . Auto Energy Saver Set
As a default setting, when the copier is reset by the auto reset, the Energy
Saver is automatically set. You can change this setting.
For how to change settings,
Default: Yes (Auto energy saver is set.) (Setting: 1)
Setting
0
1
5.Auto Off
You can set the copier to turn off after the selected time to conserve
energy.
For how to change settings,
For details about Auto Off made, contact your service representative.
Default: 30 minutes (Setting: 0)
Setting
see page 59.
1 minute
3 minutes
Auto reset is turned off.
see page 59.
No (Auto energy saver is not set.)
Yes (Auto energy saver is set.)
see page 59.
0 30 minutes
1 15 minutes
2 60 minutes
3 90 minutes
4 120 minutes
5 240 minutes
Definition
Modes
Definition
USER TOOLS
61