Table of Contents
Advertisement
5.3
Error codes and troubleshooting
The electronics of the crosstrainer are continually running tests. In case of deviations, an error code is
shown on the display and normal operation is stopped for your safety.
+
E-1
No values were received during the body fat analysis. Make sure that, during the analysis,
you hold on to the hand pulse sensors with both hands.
+
E-4
The user settings entered for age, height, weight or the body fat ratio is outside of the
setting range.
5.4
Maintenance and inspection calendar
To avoid damages from sweat, the crosstrainer must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Display of the console
Lubrication of moving
parts
Plastic covers
Screws and cable
connections
Legend: C = clean; I = inspect
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be
obtained from your local authority's recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
34
Weekly
Monthly
C
I
C
I
I
Quarterly
Half-yearly
I
Yearly
FX9.9
Advertisement
Table of Contents
Troubleshooting
