Program (Profile Programs) - Taurus FX9.9 Assembly And Operating Instructions Manual

Training with multiple target values
1. In the main menu select MANUAL and confirm your choice with a single push of the rotary knob.
2. Select your target value for time, calories, distance and/or heart rate with the rotary knob and
confirm your choice with a single push of the rotary knob.
⚠ WARNING
This crosstrainer is not medical equipment. The heart rate measurement of the crosstrainer can
be unprecise. Different factors can influence the heart rate reading. The heart rate readings are
only meant as a guide for training.
3. To start the program, press the START/STOP button.
NOTICE
L
During training it is possible to change the resistance level with the rotary knob.
The target values count down and the other values count upwards.
4. To pause the program, press the START/STOP button again.
5. To end the program, press the RESET button.
3.6

PROGRAM (Profile programs)

There are a total of 12 profile programs available to choose from.
1. In the main menu select PROGRAM and
confirm your choice with a single push of the
rotary knob.
2. Using the rotary knob select one of the profile
programs and confirm your choice with a
single push of the rotary knob.
3. Using the rotary knob select the training time
and confirm the setting with a single push of
the rotary knob.
4. To start the program, press the Um das Programm zu starten, drücken Sie die START/STOP-Taste.
NOTICE
L
During training it is possible to change the resistance level with the rotary knob.
5. To pause the program, press the START/STOP button again.
NOTICE
L
While the program is paused it is possible to change the training time.
6. To end the program, press the RESET button.
25