Taurus FX9.9 Assembly And Operating Instructions Manual page 13

Step 2: Assembling the console mast
1. Connect the console cable in the mast (101) with the console cable in the main frame (102).
2. Connect the signal cable in the mast (178) with the signal cable in the main frame (179).
࣑ ATTENTION
In the following step please pay attention that you don't clamp the cables between the frames.
3. Screw the console mast (11) to the main frame (1) with four washers (7), four spring washers (4),
four screws (119) and hand tighten the screws in place.
4. Screw the rear cover (33) to the frame with two screws (96) and hand tighten the screws in place.
119 M8*1.25*25L
4
D15.4*D8.2*2T
7
D16xD8.5x1.2T
ST4.2*15L
96
11
119
4
7
33
96
119
4
7
x4
96
x4
x4
x2
101 178
102 179
33
96
1
step2
M8*1.25*25L
D15.4*D8.2*2T
D16xD8.5x1.2T
ST4.2*15L
101
102
11
119
4
7
step2
x4
x4
x4
x2
178
179
1
13