Taurus FX9.9 Assembly And Operating Instructions Manual page 20

Step 8: Adjusting the feet
The crosstrainer can be stabilised on un-even surfaces with the adjustable feet.
1. Lift up the crosstrainer on one side to gain access to the adjustable feet underneath the frame.
2. Turn the screw clockwise to
unscrew the foot, lifting the
crosstraining at that point.
3. Turn the screw anti-clockwise
to lower the crosstrainer at that
point.
Step 9: Connecting the crosstrainer
to the mains supply
࣑ ATTENTION
The crosstrainer should not be
plugged into a power board, as
it cannot be guaranteed that the
crosstrainer will be supplied with
sufficient power. This could also
lead to technical errors occurring.
Firstly connect the power cord (117)
to the crosstrainer and then plug it
into the wall socket, making sure the
electrical prerequisites covered in the
chapter about electrical safety are met.
20
step8
FX9.9