Taurus FX9.9 Assembly And Operating Instructions Manual page 18

Step 7: Mounting the covers
1. Screw the front cover (99) under the console (19) onto the console mast (11) with two screws
(96) and hand tighten the screws in place. Clip the rear cover (98) onto the front cover (99) (see
fig. 7-1).
2. Screw the rear part of the water bottle holder (39) onto the console mast (11) with four screws
(96) and hand tighten the screws in place. Clip the front cover of the water bottle holder (38) to
the rear part (39) (see fig. 7-2).
3. Screw the front covers of the arms (64) onto both arms (12R/12L), each with two screws (96) (see
fig. 7-3) and hand tighten the screws in place.
4. Clip the rear cover for the arms (65) onto the front cover (64) and screw it onto the arms
(12R/12L), each with one screw (96) (see fig. 7-3).
5. Screw the left protective cover (30L) onto the main frame (1) with two screws (96) and one screw
(97) and hand tighten the screws in place.
6. Clip the right protective cover (30R) onto the left protective cover (30L) and screw it onto the
main frame (1) with one screw (97) (see fig. 7-4).
7. Screw the outer cover of the pedal mount (68R) onto the outer side of the pedal mount
(15R/15L), each with two screws (96) and hand tighten the screws in place. Clip the inner cover
(68L) onto the outer cover (68R) (see fig. 7-5).
8. Screw the wheel covers (63) on both sides of the crosstrainer, each with two screws (97)
(see fig. 7-6) and hand tighten the screws in place.
9. Screw the axial covers (71) on both sides if the crosstrainer, each with two screws (97) (see fig.
7-7)and hand tighten the screws in place.
18
FX9.9