User (User Defined Program) - Taurus FX9.9 Assembly And Operating Instructions Manual

3.7

USER (User defined program)

There are 16 segments available in user defined programs.
1. In the main menu select USER and confirm
your choice with a single push of the rotary
knob.
2. Select the resistance level of each segment
and confirm each value with a single push of
the rotary knob.
3. To end setting the resistance levels, press and
hold the rotary knob for 2 seconds.
The last set level is shown on the display.
You now have the option to set training time with the rotary knob.
4. Using the rotary knob, select the training time and confirm the setting with a single push of the
rotary knob or press the START/STOP button to directly start your training.
NOTICE
L
During training it is possible to change the resistance level with the rotary knob.
5. To pause the program, press the START/STOP button again.
6. To end the program, press the RESET button.
27