Chapter 2
Attaching the Device to the Rack
To attach the device to the rack:
1.
Position the unit horizontally, facing forward in the rack.
2.
Align the holes in the mounting brackets with the holes in
the rack.
3.
Insert the four #10 rackmount screws (with washers) and
tighten the screws to attach the front of the RAC to the rack
(see
Figure
2-3).
Screws
(4 Places)
Figure 2-3. Attaching the Device to the Rack
Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
RA0006A
2-7