Contents of the Kit
Data Compression Upgrade
T
he Model 8000 supports data compression. The compression is
performed by a plug-in card that is installed on the main logic board. This
chapter describes how to install the data compression card on the main
logic board.
These installation instructions contain a description of the following:
•
Contents of the kit
•
Removing the RAC cover
•
Iinstalling the compression card
•
Replacing the RAC cover
The modem upgrade kit contains:
•
One data compression card
•
Hardware kit
Required Tools
The only required tool is a Phillips screwdriver.
Installing the Model 8000 Remote Access Concentrator
Appendix C
Instructions
C-1