Connecting A Console Terminal; Figure 2-7. Connecting The Cable To The Db-25 Dte Drop Adapter - Bay Networks 8000 RAC Installing Manual

Connecting a Console Terminal

Chapter 2
You use a console terminal to access the ROM monitor and boot the RAC
for the first time. To connect a console terminal to the console port located
on the rear panel of the RAC:
1. Connect one end of the cable (provided in the accessory kit)
to the console terminal's I/O connector, using a DB-25 DTE
drop adapter

Figure 2-7. Connecting the Cable to the DB-25 DTE Drop Adapter

Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
(Figure 2-7).
RA0012A
2-11