Bay Networks 8000 RAC Installing Manual page 70

Chapter 2 Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
2-26
4. Enter the boot command.
The boot command displays information similar to this:
Enter boot file name[oper.64.enet]::
Requesting boot file "oper.64.enet".
Unanswered requests shown as '?',transmission errors
as '*'.
Requesting boot from 192.9.200.88 via Ethernet...
Booting BFS file using open delay of 8?
Booting TFTP file using open delay of 8
Booting TFTP file from 192.9.200.88
Header received OK. Received data blocks shown as '.'.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . EOF
After the RAC boots, Monitor mode is no longer operational. The RAC
is up and running, and the following message is displayed:
Console monitor ready; Press CR to start.