Console Monitor Ready; Press Cr To Start; Booting Using Tftp - Bay Networks 8000 RAC Installing Manual

Chapter 2 Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
2-24
The download takes from 30 to 60 seconds for a Model 8000 Remote
Access Concentrator booting over the local network. After the download
is complete, the Power, Unit, and Net LEDs remain on. If these LEDs do
not remain on (indicating a problem), see
Once the RAC is booted, Monitor mode is no longer operational. The
RAC is up and running, and the following message is displayed:

Console monitor ready; Press CR to start

Booting Using TFTP

To boot using TFTP, your TFTP daemon (tftpd) must be started in
(or another appropriate directory on your system) with
/etc/inetd.conf
a configuration line similar to this:
tftp dgram udp wait root /usr/etc/in.tftpd in.tftpd
-s/tftpboot
If you omit the
your system will be not be secure.
To set up directories and files and use TFTP to boot the RAC:
1. Initialize the IP address parameters using either the
autoinitialize or manual initialize method.
The auto-initialization method is described in
the IP Address Parameters on page
initialization method is described in
IP Address Parameters on page
Chapter
a chroot will not be done, and
,
-s /tftpboot
2-19. The manual
Manually Initializing the
2-22.
4.
Autoinitializing