Replacing The Rac Cover; Figure B-5. Replacing The Model 8000 Rac Cover - Bay Networks 8000 RAC Installing Manual

Appendix B Modem Upgrade Instructions

Replacing the RAC Cover

Installing the Model 8000 Remote Access Concentrator
B-8
To replace the RAC cover:
1. Lower the cover onto the unit at an angle, and insert the five
tabs on the cover into the corresponding slots on the chassis
(Figure B-5).
2. Swing the cover down into place, making sure the tabs on
the sides of the cover fit inside the corresponding slots in the
chassis.
3. Secure the cover by installing the four screws in the back of
the cover.
Do not overtighten these screws.

Figure B-5. Replacing the Model 8000 RAC Cover

RA0021A