Config - Bay Networks 8000 RAC Installing Manual

Chapter 3 ROM Monitor Commands
ROM Software Rev: 1122
Board ID: 64
CPU Type: 486DX2
Memory size: 8 Meg
Flash size: 4 Meg
Available Interfaces (* = selected): Thicknet *Twisted Pair
General Purpose Sync Port Interface: Loopback
WAN 1: CAS E1
WAN 2: CAS E1
SLC 1
SLC SRAM Size: 128 K
SLC 2
SLC SRAM Size: 128 K
Installing the Model 8000 Remote Access Concentrator
3-14
config
The config command displays the current configuration information and
revision levels for the RAC. The config command displays revision
information, the amount of memory installed, T1 or E1 configuration
information, and a description of the number and type of modems
installed. The command syntax is:
config
The config command display for a RAC with 31 modems (E1) looks
similar to this:
REVISION/CONFIGURATION INFORMATION
Board Type: 8000
Ethernet Address: 00-80-2d-xx-xx-xx
EEPROM size: 65504
Flash ID: 0089
Revision: VERSION CAS MGR=2.1
Revision: VERSION CAS MGR=2.1
Modem Count: 31
Modem Count: 31
This display is typical for E1 versions. For T1 and modemless
versions, the information displayed in some of the fields is
different than that shown in this example.
Modem Rev: 0
Modem Rev: 0