Replacing An Mda; Figure 2-12. Attaching The Product Label; Figure 2-13. Preparing The Mda For Removal - Bay Networks Centillion 50 Use Manual

7.
CLASS 1 LASER PRODUCT
Figure 2-12.

Replacing an MDA

The following steps guide you through replacing an MDA on an ATMSpeed/155
MDA and ATMSpeed/155 MDA MCP switch module:
1.
Figure 2-13.
893-01047-B
For each Model 5720-17 MDA you have installed, attach the supplied
laser product label to the front panel of the switch module, immediately
below the MDA (Figure
Use the label that is printed in the appropriate language for the country where
you are installing the equipment.
1
2
CLASS 1 LASER PRODUCT
5718EC
Attaching the Product Label
Remove the screws from the MDA
Preparing the MDA for Removal
Installing the ATMSpeed/155 Modules
2-12).
(Figure 2-13).
7878PEA
2-9