7.16
Resetting the Configuration with P RES button
It may be necessary to reset the configuration if the adapter parameters on a remote system
have been altered such that you are no longer able to access the TS Adapter IE via the
modem connection.
P RES button
The TS Adapter IE has a Reset button (P RES) with which you can reset the adapter to its
default configuration.
The following diagram shows the front panel of the TS Adapter IE with the opening
concealing the P RES button. The P RES button is behind the front panel. The
TS Adapter IE ISDN with its front panel removed is shown representing both variants of the
TS Adapter IE.
①
Figure 7-2
TS Adapter IE
Manual, 11/2010, A5E00977705-03
P RES button to reset configuration
Front view with P RES button
Working with the TS Adapter IE
7.16 Resetting the Configuration with P RES button
63