Table of Contents
Advertisement
Working with the TS Adapter IE
7.7 Establishing a Remote Connection to the TS Adapter IE
The following diagram shows an example of the assignment of IP addresses in a networked
system:
Figure 7-1
Note:
The slash separates the IP address from the subnet mask. The value after the slash - the
subnet mask value - corresponds to the number of ones in binary format.
Example:
IP address:
Subnet mask:
See also
Establishing a Remote Connection to the TS Adapter IE via TeleService (Page 49)
Establishing a Remote Connection to the TS Adapter IE via a Dial-up Connection (Page 50)
48
Example of a networked system
192.168.0.53/24
192.168.0.53
255.255.255.0 decimal = 11111111.11111111.11111111.00000000 binary
TS Adapter IE
Manual, 11/2010, A5E00977705-03
Advertisement
Table of Contents
