Table of Contents
Advertisement
Mounting
4.3 Mounting on DIN Rails
Mounting TS Adapter IE
1. Insert the slide from below into the rear panel of the TS Adapter IE.
2. Attach the TS Adapter IE in the DIN rail
3. Swivel the TS Adapter IE back until the slide engages audibly
Figure 4-3
Dismounting TS Adapter IE
Unplug the connectors from the analog and Ethernet cables of the TS Adapter IE before
dismounting the TS Adapter IE from the grounded profile rail or DIN rail.
You can see the bottom end of the slide on the underside of the TS Adapter IE.
1. To disengage the latching mechanism, use a screwdriver to pull the slide down.
2. Swivel the TS Adapter IE forward out of the DIN rail.
18
Mounting TS Adapter on DIN rail
WARNING
①
.
②
Manual, 11/2010, A5E00977705-03
.
TS Adapter IE
Advertisement
Table of Contents
