Setting Ip Parameters By Direct Connection With The Simatic Manager - Siemens SIMATIC TS Adapter IE Manual

Working with the TS Adapter IE
7.6 Setting IP Parameters of TS Adapter IE for the First Time
7.6.2

Setting IP Parameters by Direct Connection with the SIMATIC Manager

Requirement
You have a free Ethernet port on your PG/PC.
Procedure
1. Connect the Ethernet port of your PG/PC to the Ethernet port of the TS Adapter IE.
2. Connect the TS Adapter IE to your power supply.
3. In the SIMATIC Manager under "Options > Set PG/PC Interface", set the "S7ONLINE
4. From the SIMATIC Manager menu choose "PLC > Edit Ethernet Node".
5. Click "Help" to find out more about what to do next.
Result
You can now open the configuration interface of the TS Adapter IE in a browser via Ethernet
at the address http://<IP address>.
See also
Power Supply (Page 27)
Opening the Configuration Interface by Direct Connection in a Browser (Page 55)
46
(STEP 7)" access point to your PG/PC's interface card to which you have connected the
TS Adapter IE.
TS Adapter IE
Manual, 11/2010, A5E00977705-03