Internet Access - ZyXEL Communications LTE7460-M608 User Manual

You cannot log in to the web configurator while someone is using Telnet to access the LTE7460-M608.
2
Log out of the LTE7460-M608 in the other session, or ask the person who is logged in to log out.
Turn the LTE7460-M608 off and on.
3
If this does not work, you have to reset the device to its factory defaults. See
4
I cannot Telnet to the LTE7460-M608.
See the troubleshooting suggestions for
Ignore the suggestions about your browser.

10.4 Internet Access

I cannot access the Internet.
Check the hardware.
1
Make sure you entered your ISP account information correctly. These fields are case-sensitive, so make
2
sure [Caps Lock] is not on.
Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again.
3
If the problem continues, contact your ISP.
4
I cannot access the Internet anymore. I had access to the Internet (with the LTE7460-M608), but
my Internet connection is not available anymore.
Check the hardware connections.
1
Turn the LTE7460-M608 off and on.
2
If the problem continues, contact your ISP.
3
The Internet connection is slow or intermittent.
There might be a lot of traffic on the network. If the LTE7460-M608 is sending or receiving a lot of
1
information, try closing some programs that use the Internet, especially peer-to-peer applications.
Turn the LTE7460-M608 off and on.
2
Chapter 10 Troubleshooting
I cannot see or access the Login screen in the web configurator.
LTE7460-M608 User's Guide
105
Section 8.3 on page 83.