Ddns Settings Screen - ZyXEL Communications LTE7460-M608 User Manual

7.11 DDNS Settings Screen

Dynamic DNS allows you to update your current dynamic IP address with one or many dynamic DNS
services so that anyone can contact you (in applications such as NetMeeting and CU-SeeMe). You can
also access your FTP server or Web site on your own computer using a domain name (for instance
myhost.dhs.org, where myhost is a name of your choice) that will never change instead of using an IP
address that changes each time you reconnect. Your friends or relatives will always be able to call you
even if they don't know your IP address.
First of all, you need to have registered a dynamic DNS account with www.dyndns.org. This is for people
with a dynamic IP from their ISP or DHCP server that would still like to have a domain name. The Dynamic
DNS service provider will give you a password or key.
Use the Dynamic DNS screen to enable DDNS and configure the DDNS settings on the LTE7460-M608. To
change your LTE7460-M608's DDNS, click Networking > DDNS Settings. The screen appears as shown.
Figure 56 Networking > DDNS Settings
The following table describes the labels in this screen.
Table 25 Networking > DDNS Settings
LABEL
Dynamic DNS Settings
Enable Dynamic DNS
Server
Domain Name
User Name
Password
Apply
Reset
Chapter 7 Networking
DESCRIPTION
Select the check box to use Dynamic DNS.
Select the name of your Dynamic DNS service provider.
Type the domain name assigned to your LTE7460-M608 by your Dynamic DNS service
provider.
Type your user name for the Dynamic DNS service provider.
Type your password for the Dynamic DNS service provider.
Click Apply to save your changes back to the LTE7460-M608.
Click Reset to reload the previous configuration for this screen.
LTE7460-M608 User's Guide
71