Technical Reference - ZyXEL Communications LTE7460-M608 User Manual

The following table describes the labels in this screen.
Table 16 Home Network > Connected Devices
LABEL
MAC Address
Host Name (if any)
IP Address

6.7 Technical Reference

This section provides some technical background information about the topics covered in this chapter.
LANs, WANs and the LTE7460-M608
The actual physical connection determines whether the LTE7460-M608 ports are LAN or WAN ports.
There are two separate IP networks, one inside the LAN network and the other outside the WAN network
as shown next.
Figure 28 LAN and WAN IP Addresses
DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the LTE7460-M608 as a DHCP server or
disable it. When configured as a server, the LTE7460-M608 provides the TCP/IP configuration for the
clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the
computer must be manually configured.
Chapter 6 Home Network
DESCRIPTION
This shows an icon representing how the device is connected to the LTE7460-M608.
This field displays the MAC address of the device.
This displays the device host name.
This field displays the IP address that the LTE7460-M608 assigns to the device.
LTE7460-M608 User's Guide
46