The Diagnostic Screen - ZyXEL Communications LTE7460-M608 User Manual

Table 42 System > System Log
LABEL
Enable Remote Log
Remote Log Host
Remote Log Port
Apply
Reset
System Log Display
The log wraps around and deletes the old entries after it fills. Select what logs you want to see from the Log Level
drop list. When you select a log level, the LTE7460-M608 searches through all logs of that level or higher. The screen
displays the time the log message was recorded. It also displays the reason the log message was generated
Refresh

9.9 The Diagnostic Screen

Use this screen to determine if your LTE7460-M608 has a connected device to it. To access this screen,
click System > Diagnostic.
Figure 79 System > Diagnostic
Chapter 9 System
DESCRIPTION
Select the check box to enable syslog logging.
Syslog logging sends a log to an external log server.
Enter the domain name or IP address of the syslog server to which the LTE7460-M608
sends the logs.
Enter the port number of the syslog server.
Click Apply to save your changes back to the LTE7460-M608.
Click Reset to reload the previous configuration for this screen.
Click Refresh to renew the log screen.
LTE7460-M608 User's Guide
101
.