The Upnp Screen; The Connected Devices Screen - ZyXEL Communications LTE7460-M608 User Manual

6.5 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use. See
more information on UPnP.
Use the following screen to configure the UPnP settings on your LTE7460-M608. Click Home Network >
UPnP to display the screen shown next.
Figure 26 Home Network > UPnP
The following table describes the labels in this screen.
Table 15 Network Settings > Home Networking > UPnP
LABEL
Enable UPnP
Apply
Reset

6.6 The Connected Devices Screen

Click Home Network > Connected Devices to view current information (including IP Address, Host Name
and MAC Address) of network clients connected to the LTE7460-M608. The following screen displays.
Figure 27 Home Network > Connected Devices
Chapter 6 Home Network
DESCRIPTION
Select On to activate UPnP. Be aware that anyone could use a UPnP application to open the
web configurator's login screen without entering the LTE7460-M608's IP address (although you
must still enter the password to access the web configurator).
Click Apply to save your changes.
Click Reset to restore your previously saved settings.
LTE7460-M608 User's Guide
45
page 48 for