Dns Settings Screen - ZyXEL Communications LTE7460-M608 User Manual

The following table describes the labels in this screen.
Table 18 Networking > TR069
LABEL
Connection Request User
Name
Connection Request
Password
Connection Request Port
Inform
Inform Interval
Bound Interface Name
Apply
Reset
Import Certificate File
Select a File
Apply
Current TR-069 Certificate file
File Name
Subject
Issuer
Valid From
Valid To

7.4 DNS Settings Screen

Click Networking > DNS Settings to configure the DNS servers your LTE7460-M608 uses. The following
screen displays.
Chapter 7 Networking
DESCRIPTION
Enter the connection request user name. When the ACS makes a connection
request to theLTE7460-M608, this user name is used to authenticate the ACS.
Enter the connection request password. When the ACS makes a connection request
to the LTE7460-M608, this password is used to authenticate the ACS.
The default port for access to the LTE7460-M608 from the management server is the
HTTP port, port 80. If you change it, make sure it does not conflict with another port
on your network and it is recommended to use a port number above 1024 (not a
commonly used port). The management server should use this port to connect to
the LTE7460-M608. You may need to alter your NAT port forwarding rules if they were
already configured.
Select Enable for the LTE7460-M608 to send periodic inform via TR-069 on the WAN.
Otherwise, select Disable.
Enter the time interval (in seconds) at which the LTE7460-M608 sends information to
the autoconfiguration server.
Select whether the TR069 connection path is WAN1 or WAN2.
Click Apply to save your changes.
Click Reset to restore the screen's last saved settings.
Use this field to upload a certificate the LTE7460-M608 uses for TLS/SSL
authentication.
Click Apply to upload the certificate.
This field displays the name used to identify this TR-069 certificate. It is recommended
that you give each certificate a unique name.
This field displays identifying information about the certificate's owner, such as CN
(Common Name), OU (Organizational Unit or department), O (Organization or
company), S (State), and C (Country). It is recommended that each certificate has
unique subject information.
This field displays identifying information about the certificate's issuing certification
authority, such as a common name, organizational unit or department, organization
or company and country.
This field displays the date that the certificate becomes applicable. The text displays
in red and includes a Not Valid! message if the certificate has not yet become
applicable.
This field displays the date that the certificate expires. The text displays in red and
includes an Expired! message if the certificate is about to expire or has already
expired.
LTE7460-M608 User's Guide
63