ZyXEL Communications LTE7460-M608 User Manual page 32

The following table describes the labels in this screen.
Table 6 Internet > Internet Status
LABEL
Internet Status
Internet Status (IPv4)
IP Address (IPv4)
Connection Time (IPv4)
Internet Status (IPv6)
IP Address (IPv6)
Connection Time (IPv6)
Advanced Internet Information
Network Provider
Network Type
MCC
MNC
Band
EARFCN/UARFCN/ARFCN
LAC
TAC
CID
Ec/Io
PCI
RSCP
RSRP
RSRQ
SNR
RSSI
Chapter 5 Internet
DESCRIPTION
This shows the IPv4 mobile data connection status.
This field displays the current IPv4 address assigned to the WAN interface.
This field displays how long you connect to the Internet through IPv4.
This shows the IPv6 mobile data connection status.
This field displays the current IPv6 address assigned to the WAN interface.
This field displays how long you connect to the Internet through IPv6.
This shows the name of the service provider for the mobile network to which the
LTE7460-M608 is connected.
This shows the mobile network type (such as LTE, UMTS, GSM, HSPA+, etc.) to which
the LTE7460-M608 is connecting.
This displays the Mobile Country Code (MCC), which is used to identify the country
of a mobile subscriber.
This displays the Mobile Network Code (MNC), which is used in combination with
MCC to identify the public land mobile network (PLMN) of a mobile subscriber.
This displays the network type and the frequency band used by the mobile network
to which the LTE7460-M608 is connecting.
This displays the channel used by the mobile network to which the LTE7460-M608 is
connecting.
This displays the 2-octet Location Area Code (LAC), which is used to identify a
location area within a PLMN.
This displays the Tracking Area Code (TAC), which is used to identify the country of a
mobile subscriber.
This displays the Cell ID (CID), which is a unique number used to identify the Base
Transceiver Station to which the LTE7460-M608 is connecting.
This displays the ratio (in dB) of the received energy per chip and the interference
level.
This shows the Physical Cell ID(PCI), which are queries and replies among the
LTE7460-M608 and the mobile network it is connecting to.
This displays the Received Signal Code Power (RSCP) which measures the power on
the channel used by the LTE7460-M608.
This displays the Reference Signal Receive Power (RSRP), which is the average
received power of all Resource Elements (RE) that carry cell-specific Reference
Signals (RS) within the specified bandwidth.
This displays the Reference Signal Received Quality (RSRQ), which is the ratio of RSRP
to the E-UTRA carrier RSSI and indicates the quality of the received reference signal.
This displays the Signal-to-Noise-Ratio (SNR), which indicates a ratio of signal power
to noise power.
This displays the received signal strength indicator (RSSI), that is, the received signal
strength in dBm.
LTE7460-M608 User's Guide
32