ZyXEL Communications LTE7460-M608 User Manual page 37

Figure 21 Internet > Network Selection
The following table describes the labels in this screen.
Table 10 Internet > Network Selection
LABEL
PLMN Mode
Select PLMN Mode
Selected Network Name
Selected Network Type
Scan Timestamp
Status
Network Name
Network Type
Scan
Apply
Reset
Chapter 5 Internet
DESCRIPTION
Select Auto to have the LTE7460-M608 automatically connect to the first available
mobile network.
This shows the ISP the LTE7460-M608 is currently connected to.
This shows the type of network the LTE7460-M608 is using when connected to the ISP.
This shows the last time the LTE7460-M608 scanned for ISPs on its surroundings.
Check the radio button so the LTE7460-M608 connects to this ISP.
This shows Current to show the ISP the LTE7460-M608 is currently connected to.
This shows Forbidden to indicate the LTE7460-M608 can not connect to this ISP.
This shows Available to indicate an available ISP your LTE7460-M608 can connect to.
This shows the ISP name.
This shows the type of network the ISP provides.
Click Scan for the LTE7460-M608 to check for available ISPs on its surroundings.
Click Apply to save your changes back to the LTE7460-M608.
Click Reset to reload the previous configuration for this screen.
LTE7460-M608 User's Guide
37