ZyXEL Communications LTE7460-M608 User Manual page 15

Chapter 2 Introducing the Web Configurator
Figure 7 Navigation Panel
The following table describes all the screens in the Web Configurator.
Table 3 Navigation Panel
MAIN MENU SUBMENU
Home
Internet Internet Status
Internet Settings
PIN Settings
APN Configuration
Network Selection
Data Usage/ Statistic Specify limiting the amount of the package data and view the LTE7460-
Home Network LAN IP
DHCP
Static Route
UPnP
Connected Devices
Networking Operating Mode
TR069
DNS Settings
Firewall
DDNS Settings
VPN Pass Through
Certificate
Management
Bandwidth
Management
Remote
Management
ICMP
FUNCTION
Display connection mode, wireless LAN information and the LTE7460-
M608's traffic statistics.
Use this screen to access the wizard.
Configure the WAN settings on the LTE7460-M608 for Internet access.
Use this to enable data roaming on the LTE7460-M608.
Select when and the type of network to which you want to connect.
Configure the PIN code when PIN code authentication is enabled.
Change the PIN code for the inserted SIM card.
Configure user-defined connection profiles.
Display available Public Land Mobile Networks and select a preferred
network for roaming.
M608's traffic statistics.
Configure the management IP address for the LTE7460-M608 LAN
interface.
Enable the DHCP server on the LTE7460-M608.
Configure static DHCP series.
Use this to add up to 15 static routes on the LTE7460-M608.
Enable the UPnP settings on the LTE7460-M608.
View current clients information of network clients connected to the
LTE7460-M608.
Use this to choose the operating mode for your LTE7460-M608.
Configure TR069 for an administator to use an Auto Configuration Server
(ACS) to manage the LTE7460-M608.
Configure the DNS settings on the LTE7460-M608.
Configure IPv4/Port, IPv6/Port, URL filtering rules, DoS attack, ALG, ULG,
and IP port forwarding rules.
Configure the Dynamic DNS settings on the LTE7460-M608.
Use this to allow computers to establish an outbound VPN service.
Use this to upload and download certificate files to authenticate servers
and clients in your network.
Use this to control traffic on your LTE7460-M608.
Use this to allow addresses outside your LAN to access the LTE7460-M608.
Use this screen to enable WAN and LAN ping respond.
LTE7460-M608 User's Guide
15