03-01 8-93
DISASSEMBLY AND ASSEMBLY (Continued)
25. CAUTION: Crankshaft must only be rotated
in the clockwise direction and only as far as
top dead center (TDC) No. 1 cylinder.
Rotate crankshaft clockwise 45 degrees. This
will position crankshaft at top dead center (TDC)
No. 1 cylinder.
Retainer Locations
0
REFER TO LEGEND
TIGHTEN
IN SEQUENCE
Engine, 4.6L (2V)
26. Install timing chains as described.
27. Replace crankshaft front seal (6700) in engine
28. Install engine front cover as described.
A13658-B
1
front cover if required.
1997 Thunderbird, Cougar July 1 996
03-01 8-93