Table Of Contents - Ford Thunderbird Manual

03-018-83
DISASSEMBLY AND ASSEMBLY (Continued)
13. If necessary, disassemble intake manifold as
follows:
a. Remove throttle body (9E926) and throttle
body adapter.
b.
Remove idle air control valve (lAC
valve)(9F7 1 5).
c. Remove engine coolant temperature sensor
(ECT sensor)( 12A648) and water
temperature indicator sender unit (1 0884).
d. Remove four bolts retaining fuel injection
supply manifold (9F792) and remove fuel
injection supply manifold and fuel injectors.
14. Remove RH and LH valve cover (6582)
LH SIDE SHOWN
RH SIDE SIMILAR
Part
Item Number
1 6582
2 6584
3 N806356-S2
4 6766
5 N806183-S2
6 6582
(Continued)
Engine, 4.6L (2V)
/
FRONT OF
ENGINE
/
AA0636·A
Description
Valve Cover (RH)
Valve Cover Gasket
Stud (LH 4 Req'd, RH 2
Req'd)
Oil Filler Cap
Bolt (LH 7 Req'd, RH 9
Req'd)
Valve Cover (LH)
Part
Number
Item Description
7 6049 Cylinder Head (LH)
8 N807441 Stud Bolt
-
Tighten to 8- 12 N·m (7 1-1 06
A
Lb-ln)
1 5. Remove crankshaft pulley bolt (6A340) and
crankshaft pulley retaining washer (6378).
1 6. Using Crankshaft Damper Remover
T58P-63 1 6-D, pull crankshaft pulley (63 1 2) from
crankshaft.
1 7. Remove connecting rod bolt (62 1 4) and camshaft
position sensor (CMP sensor)(6B288) from
engine front cover (60 1 9).
Part
Item Number Description
1 6C315 Crankshaft Position Sensor
2 N605907-S2 Bolt (4 Req'd)
3 6B288 Camshaft Position Sensor
4 N806 155-S2 Bolt
N806 155-S2 Bolt
5
(Continued)
1997 Thunderbird, Cougar July 1996
03-01 8-83
A13668- B
/
FRONT OF
ENGINE
A24307·A