Daikin Super Multi NX 3MXS-G Series Engineering Data page 451

EDUS121131
 DAILY timer
After programming, the system starts and stops each day at the preset times. Two pairs of time settings
can be programmed.
~
(Example: 8:00
1
Press
2
Make the ON and OFF time settings.
Program example: 8:00
Settings
ON time setting

When the timer
used, save the setting
as
1
OFF time setting
ON time setting

When the timer
used, save the setting
as
2
OFF time setting
3
Press
Note
 If the following appears on the display, the timer must be reprogrammed.
This means that Timers
programmed for the same time settings.
New time settings must be made.
14
Options
~
10:00, and 18:00 23:00)
to select the DAILY timer.
~
10:00, and 18:00
Procedure
Press
is not
1
is not
2
. The DAILY timer is now programmed.
The 24-hour timer display
is blinking.
and are
DAILY timer indication appears.
lights up.
 Take the steps from
to
~
23:00
Press
The 24-hour timer display
is blinking.
This means that the timer has not been
programmed yet.
Optional Accessories
.
to make the
timer setting.
4
447