Daikin Super Multi NX 3MXS-G Series Engineering Data page 390

EDUS121131
FDXS09/12DVJU
HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to
record your preferred temperature and air flow rate settings.
 To start HOME LEAVE operation
1. Press "HOME LEAVE button".
• " " is displayed on the LCD.
• The HOME LEAVE lamp lights up.
 To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
• " " disappears from the LCD.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
 To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow
rate for HOME LEAVE operation. Record your preferred temperature and air flow rate.
Temperature
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
controller display.
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change the
recorded information, repeat steps 1 – 3.
Operation Manual
Initial setting
Air flow rate
77˚F " "
77˚F " "
" or "
Selectable range
Temperature Air flow rate
64-90˚F 5 step, "
50-86˚F 5 step, "
" is displayed in the remote
" as you like.
Operations
1, 2
" and
" "
" and
" "
3
385