Daikin Super Multi NX 3MXS-G Series Engineering Data page 375

Operations
 To set the clock
1. Press "CLOCK button".
is displayed.
blinks.
2. Press "TIMER setting button" to set the clock to the
present time.
Holding down "
decreases the time display.
3. Press "CLOCK button".
blinks.
 Turn the breaker ON
• Turning ON the breaker opens the flap, then closes it again.
(This is a normal procedure.)
NOTE
 Tips for saving energy
•
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling
(heating) effect.
•
Clogged air filters cause inefficient operation and waste energy. Clean them once every two weeks.
 Please note
•
The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
•
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn
the breaker OFF.
•
Use the air conditioner in the following conditions.
Mode
COOL Outdoor temperature: 14 to 115˚F
HEAT Outdoor temperature: 5 to 64˚F
DRY
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
370
" or " " button rapidly increases or
Operating conditions
Indoor temperature: 64 to 90˚F
Indoor humidity: 80% max.
Indoor temperature: 50 to 86˚F
Outdoor temperature: 14 to 115˚F
Indoor temperature: 64 to 90˚F
Indoor humidity: 80% max.
Recommended temperature setting
For cooling: 78˚F – 82˚F
For heating: 68˚F – 75˚F
If operation is continued out of this range
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
•
A safety device may work to stop the operation.
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
EDUS121131
2
1, 3
Operation Manual