Utility Parameters - Roland Interactive Arranger EXR-46 OR Owner's Manual

r EXR-46 OR

UTILITY parameters

I LockInit
(On/Off, Default setting: On) This function allows you to pro-
tect the EXR-46 OR's Flash area from accidentally initializing it
(see the next parameter). Select "Off" only before using the
"InitFLSH" parameter. For safety reasons, this parameter is reset
to "On" when you switch off the EXR-46 OR.
If you want to initialize the Flash area without first selecting
this FUNCTION parameter, hold down the [KEYBOARD¥TOUCH]
button while switching the EXR-46 OR on. The display then
briefly shows the "UNLCKFLS" message.
I InitFLSH (Flash initialization)
This function initializes (formats) the EXR-46 OR's Flash mem-
ory, which is only necessary if the data in the Flash memory
become unreadable.
Note: Executing this function erases all Standard MIDI Files and
Music Styles in the EXR-46 OR's Flash area.
Press [YES/+] in response to the flashing Yes message. The
"Sure?" message appears and the Yes message starts flash-
ing. Press [YES÷+] to initialize the Flash area (or [NO/–] if you
changed you mind).
After showing the "Complete" message, the EXR-46 OR
leaves this function.
I Resume
Select this function to recall the EXR-46 OR's factory Function
settings.
Note: Resume does not reset the MIDI parameters of the FUNC-
TION mode (see p. 47).
Press [YES/+] in response to the flashing Yes message. After
showing the "Complete" message, the EXR-46 OR leaves
this function.
Note: There is no "Sure?" question that gives you time to think.
Only press [YES/+] if you are certain you want to recall ALL factory
Function settings.
44