Detailed Settings For Various Functions; Basic Operations In The Utility Screen - Roland MUSIC ATELIER Series Owner's Manual

Detailed Settings for Various Functions

Basic Operations in the Utility Screen

In the Utility screen you can make various settings related to performance and recording.
1 3 2
5 4
Selecting the parameter to edit
1. Press the [Utility] button.
The [Utility] button's indicator will light, and the Utility screen appears.
2. Use the Menu [ ] [
If you've selected a parameter for which "Press [Rec]" is not shown in the lower right of the screen, proceed to step 4.
MEMO
By holding down the [Utility] button while using the Menu [
3. Press the [Utility] button.
Repeat these steps to select the parameters that you want to edit.
Pressing the [Display/Exit] button will take you back to the previous screen.
Editing the value
4. Use the Value [-] [+] buttons to change the value of the setting.
Pressing the [-] [+] buttons simultaneously will return the value to the factory setting.
Pressing the [Display/Exit] button will take you back to the previous screen.
If you want to edit other settings, return to step 2 of "Selecting the parameter to edit, " and select the item that you want to change.
5. Press the [Display/Exit] button a number of times.
The [Utility] button's indicator will go out, and you will return to the basic screen.
MEMO
• When you turn off the power, the settings you edited will return to their original values.
• Some settings are remembered even after the power is turned off. For details on the settings that can be saved, refer to "Stored Items" (p. 123).
90
] buttons to select the parameter that you want to edit.
] [ ] buttons, you can skip several parameters when making your selection.