Messages And Signals - Sharp FO-2950M Operation Manual

All manuals and user guides at all-guides.com
all-fo2950a.book Page 133 Thursday, March 23, 2000 5:38 PM

Messages and Signals

Display messages
CAN'T PRINT DATA
CHECK PAPER SIZE
CHECK PC
COVER OPEN
DOCUMENT JAMMED
FUNCTION MODE
GRP . SPACE FULL
HOLD
LINE ERROR
A fax has been received to memory because printing
is not possible. This message will alternate with a
message that indicates the problem. The fax will print
out automatically when the problem is resolved.
The paper size setting is incorrect. Change the paper
size setting as described in Loading Printing Paper in
Chapter 1.
This appears if you press the E-MAIL key and your
computer is not turned on or is not correctly
connected to the fax machine.
The print compartment cover is open. Press down
firmly on both sides of the print compartment cover to
close it.
The original document is jammed. See the following
section, Clearing Paper Jams.
The FUNCTION key has been pressed.
This appears if you attempt to program a Group Key
when all Group Keys have already been
programmed.
The HOLD/SEARCH key has been pressed to put the
other party on hold during a phone conversation.
Press the HOLD/SEARCH again to take the other
party off hold.
Transmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see Line Error in Problems
and Solutions in this chapter.
Messages and Signals
133