Important Safety Information - Sharp FO-2950M Operation Manual

All manuals and user guides at all-guides.com
all-fo2950a.book Page 3 Thursday, March 23, 2000 5:38 PM
Dimensions
Weight
As a part of our policy of continuous improvement, SHARP reserves the right to
make design and specification changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.

Important safety information

Be sure to save these instructions!
When using your facsimile equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
• For your safety, if any of your equipment is not operating properly
or should any physical damage occur to the equipment where
internal parts may become exposed, the equipment should be
immediately disconnected from the phone line and then the power
line and returned to a SHARP authorised Service Centre for
inspection, repair, or disposal.
• In Australia, installing or modifying telephone lines should only be
done by an ACA licensed serviceman. In New Zealand, installing or
modifying telephone lines should be done in accordance with
Telecom wiring practices.
• Do not disassemble this machine or attempt any procedures not
described in this manual. Refer all servicing to qualified service
personnel.
• This machine must only be connected to a 230-240 V, 50 Hz,
earthed (3-prong) outlet. Connecting it to any other kind of outlet
will damage the machine and invalidate the warranty.
Width: 386 mm
Depth: 398 mm
Height: 169 mm
Approx. 6.3 kg
3