Table of Contents
Advertisement
im Vertrieb von
Operation, cont'd
2.
Figure 3-57 — Select Audio mode
3.
Figure 3-58 — Select an input
Figure 3-59 — Level display on a 16-output-button switcher
www.camboard.de
3-38
CrossPoint 450 Plus and MAV Plus Switchers • Operation
CAMBOARD Electronics
Press and hold the Audio button for approximately 2 seconds (figure 3-57).
2 seconds
AUDIO
Press and hold the Audio button until it blinks.
= Blinking button
Press and release the input 5 button (figure 3-58).
Press and release the Input 5 button.
The button lights green.
1
2
3
4
5
17 18 19 20 21 22 23 24
Green Green Green Green Green Green Green Green
1
2
3
4
5
17 18 19 20 21 22 23
The output buttons display the selected input's audio level and polarity (gain or attenuation).
Each output button indicates 1 dB when lit.
When the buttons are lit green, they indicate a gain (+) audio level.
When the output buttons are lit red, they indicate an attenuation (-) level.
In this example, the output buttons display an audio gain level of +8 dB.
= Unlit button
Figure 3-59 shows the same level (+8 dB) as in figure 3-58, but displayed on a
16-output-button switcher, such as a CrossPoint 450 Plus 816 HVA.
Green Green Green Green
1 2 3 4
5 6 7 8
In this example, the output buttons display an audio gain level of +8 dB.
= unlit button
Figure 3-60 shows the same level (+8 dB) as in figure 3-58, but displayed on a
8-output-button switcher, such as a MAV Plus 84 HDA.
Tel. 07131 911201
Fax 07131 911203
AUDIO
I
6
7
8
N
P
U
T
S
O
6
7
8
9 10
U
T
P
U
24 25 26
T
S
14 15 16
OUT
ce-info@camboard.de
Advertisement
Table of Contents
