Table of Contents
Advertisement
im Vertrieb von
www.camboard.de
CAMBOARD Electronics
2.
Press and hold the Preset button for approximately 2 seconds until it blinks
(figure 3-43).
2 seconds
PRESET
PRESET
Press and hold the Preset button until it blinks.
All input buttons with assigned presets light red.
If you then save the configuration to a lit preset number,
the configuration data at that preset location will be overwritten.
= Blinking button
Figure 3-43 — Enter Save Preset mode
3.
Press and release the input or output button for the desired preset
(figure 3-44).
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not saved.
1
2
3
4
17 18 19 20 21 22 23 24
= Blinking button
Figure 3-44 — Select the preset
Figure 3-41 shows the presets associated with the various input and output
buttons for all three front panel configurations.
4.
Press and release the Enter button (figure 3-45). The current configuration is
now stored in the selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW
ESC
ENTER
PRESET
The Enter and Preset
buttons return to unlit or
background illumination.
Figure 3-45 — Press the Enter button
Tel. 07131 911201
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Fax 07131 911203
I
5
6
7
8
N
P
U
T
S
All input buttons return to unlit
or background illumination.
ce-info@camboard.de
Red
(Preset Assigned)
I
1
1
2
2
N
P
U
T
17 18
17 18
S
Unlit
(No Preset Assigned)
C O N T R O L
VIEW
ESC
ENTER
PRESET
The Enter button blinks to
indicate the need to save the
preset.
The Preset button continues
to blink.
3-29
Advertisement
Table of Contents
