Table of Contents
Advertisement
im Vertrieb von
Operation, cont'd
Example 9: Muting and unmuting an output
The following steps show an example in which several switcher outputs are muted
and unmuted. The steps show the front panel indications that result from your
action.
1.
Figure 3-50 — Clear all selections
2.
3.
Figure 3-51 — Select RGBHV or video and audio
www.camboard.de
3-32
CrossPoint 450 Plus and MAV Plus Switchers • Operation
CAMBOARD Electronics
Press and release the Esc button (figure 3-50).
Press the Esc button to clear all selections.
C O N T R O L
VIEW
ESC
ENTER
PRESET
The button flashes once.
Press and release the View button to enter View-Only mode. The View button
lights red.
To select both video and audio for viewing and muting, if necessary, press
and release the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus
switchers) button and the Audio button (figure 3-51).
This example shows the front panel indications if example 1, example 2, and
example 3 have been completed.
I / O
VIDEO
AUDIO
Press the RGBHV/ Video
Press the Audio button
button to toggle on and off.
to toggle on and off.
The button lights green
The button lights red
when selected.
when selected.
Until you select an input, the buttons for all untied outputs light
amber if no inputs are tied, green if no video inputs are tied
(only audio is tied), or red if no audio inputs are tied (only
video is tied).
17 18 19 20 21 22 23 24
Until you select an input, the buttons for all untied outputs light
amber if no inputs are tied, green if no video inputs are tied
(only audio is tied), or red if no audio inputs are tied (only
video is tied).
Tel. 07131 911201
Fax 07131 911203
1
2
3
4
5
6
ce-info@camboard.de
O
7
8
U
T
P
U
T
S
Advertisement
Table of Contents
