Table of Contents
Advertisement
im Vertrieb von
Quick Start — CrossPoint 450 Plus
and MAV Plus Switchers, Cont'd
On audio models, the output buttons also
display the selected input's audio level.
On audio models, the input buttons also
display the selected output's volume level.
Enter button saves changes.
Preset button saves a configuration as a preset or
recalls a previously-defined preset.
View button selects a view-only mode that
prevents inadvertent configuration changes.
On audio models, View decrements the level
and volume. See View, adjust the audio level.
Esc button cancels selections in progress and
resets the front panel button indications. The
Esc button does not reset: the current
configuration, the RGBHV or video and audio
selection, any presets, or any audio level or
volume settings. On audio models, Esc
increments the level and volume. See View,
adjust the audio level.
RGBHV (CrossPoint 450 Plus)/Video (MAV Plus)
and Audio buttons select/deselect video
and/or audio. The Audio button blinks to
indicate audio breakaway. The Audio button
also selects the audio level/adjust mode. See
View, adjust the audio level.
Create a tie
1. Press and release the RGBHV/Video and/or
Audio I/O button(s) to select or deselect
video and/or audio as desired.
I / O
RGBHV AUDIO
Green when selected.
Red when selected.
Off when deselected.
Off when deselected.
2. Press and release the desired input button.
The button lights to indicate the selection.
5
3. Press and release the desired output button(s).
Amber indicates RGBHV/video and audio tie.
Green indicates RGBHV/video only tie.
Red indicates audio only tie.
3
4
8
Green indicates the need
to confirm the change.
4. Press and release the Enter button.
www.camboard.de
CAMBOARD Electronics
Save or recall a preset
1. Save a preset — Press and hold the Preset
button for 2 seconds.
Recall a preset — Press and release the Preset
button.
Save a
preset
Recall a
preset
2. Press and release the desired input or output
button.
1
3. Press and release the Enter button.
View, adjust the audio level
1. Press and hold the
Audio button.
2. Press an input or
output button. See
chapter 3 to read the displayed value.
Press an Input button to adjust gain/attenuation.
5
Press an Output button to adjust volume.
1
17 18
3. Increase and
decrease the
gain/attenuation or
volume level by
ENTER
pressing the Esc
(
) and View (
buttons.
4. Press and release the Audio button to exit.
Tel. 07131 911201
Fax 07131 911203
2 seconds
PRESET
Press and hold.
Preset button blinks.
PRESET
Press and release.
Preset button lights.
All input and output buttons with
assigned presets light red.
The configuration data at assigned
preset locations will be overwritten.
1
2
3
4
5
6
17 18 19 20 21 22
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
ENTER
green to indicate the need
to activate the save or recall.
2 seconds
AUDIO
Press and
Hold
2
Output buttons display gain/attenuation.
Input buttons display volume.
button decreases
button increases
the level or volume.
the level or volume.
VIEW
ESC
)
ce-info@camboard.de
PRESET
PRESET
AUDIO
Audio button blinks.
Advertisement
Table of Contents
