Setting Up An Internet Connection With Pppoev6 - Tenda AC1200 User Manual

Dual-band router

Hide thumbs Also See for AC1200:

Table of Contents

11.3

Setting up an internet connection with

PPPoEv6

Configuration procedures:

Step 1

Click IPv6 to enter the configuration page.

Step 2

Switch the IPv6 button from

Step 3

Select PPPoEv6 from the Connection Type drop-down list box.

Step 4

Enter the PPPoE username provided by your ISP.

Step 5

Enter the PPPoE password provided by your ISP.

Step 6

Select the IPv6 LAN Address type.

Step 7

Enable/disable DHCPv6 of the router.

Step 8

Select the DHCPv6 Address Assignment Method as required, and set the related

parameters.

Step 9

Select the IPv6 DNS mode as required, and set the related parameters.

Step 10

Click OK at the bottom of the page.

---End

After the settings take effect, check the IPv6 Status. If there are IP addresses of IPv6 WAN address,

default IPv6 gateway and related parameters, the router is connected to the internet successfully.

state.

Table of Contents

Show Quick Links

Table of Contents