firmware. If you want to upgrade the firmware, click Upgrade and the router upgrades the
firmware automatically.
Configuration procedure:
Step 1
Choose Administration > Device Management on the router web UI.
Step 2
Click Online Upgrade.
---End
Wait until the progress bar is complete. Log in to the web UI of the router again. Choose Status >
System Information and check whether the upgrade is successful based on Firmware Version
For better performance of the new firmware of the router, you are recommended to reset the router
to factory default settings and re-configure the router when the upgrading completes.
Automatic Maintenance
Automatic maintenance enables you to make the router restart regularly. It helps improve the
stability and service life of the router.
To configure the automatic maintenance function, choose Administration, and move to the Device
Management. If this function is enabled, the router reboots during 03:00~05:00 a.m. every day
when the traffic is lighter than 3 KB/s. By default, this function is enabled.
86
.