Lan Parameters - Tenda AC1200 User Manual

12.3

LAN parameters

In this section, you can view and modify the LAN IP address and DHCP server parameters of the
router.
The DHCP server can automatically assign IP addresses, subnet masks, gateways and other related
parameters to the clients of the router.
Choose Administrator, and move to the LAN Parameters module to enter the configuration page.
Parameter description
Parameter
LAN IP Address
Subnet Mask
DHCP Server
Start IP Address/End
IP Address
Preferred DNS Server
Alternate DNS Server
Description
It specifies the LAN IP address of the router, which is also the management IP
address, for logging in to the router web UI.
It specifies the subnet mask of the LAN port.
It specifies whether to enable DHCP server.
It specifies the range of IP addresses that can be assigned to devices connected to
the router.
It specifies the preferred DNS address of the router, which is used to assign to the
clients. It is the LAN IP address of the router by default. You can change it if
necessary.
It specifies the alternate DNS address of the router used to assign to the clients. It is
an optional field and is left blank by default.
77